Local Jobs

Classifieds Indian Jobs

Officer/sr. Officer- R&D

Posted on 19 Feb

Rallis India Limited

Method development of new & existing products (by Instrumental & classical) & Method Validation. Analysis of Raw , Materials , Intermediates & Finished products, Interpretation of Spectra (NMR, GCMS,HPLCMS,FTIR ectc), Caliberation & Maintenance of Instruments

Formulation development, Technology transfer.
To carry out new formulation development to disperse load of new products added by NPDI.
Project transfer, Pilot trials and support to manufacturing during commercial scaling up.
Assist in improving existing formulations.

Project Chief -body and Chassis Automotive Embedded System Validation

Posted on 20 Feb

Chrysler India Automotive pvt ltd

Test case design, test procedure and test script development by analyzing the system behavior requirements, performance specifications and vehicle features.

Setting up of HIL system for system validation (Familiar with HIL system functionality, hardware/software tool set, Hardware IO requirements, Sensor and actuator signal interfaces in Body and Chassis Electrical systems).

Automotive Body and Chassis Embedded ECUs System Software Validation using HIL systems such as dSPACE, Labcar and Vector tools.

Identification of root cause for the defects found during validation and reporting the defects in the web tracking system.

Analyst - CAE | Creative Synergies Group

Posted on 20 Feb

Creative Synergies Consulting India Pvt. Ltd.

Experience in FE modeling of sheetmetal / plastic trims using HM
Preparation of subsystem assemblies with sectional / material properties
Exposure to full vehicle level projects will be added advantage Experience in automotive subsystems preferred

Catia v5/ UG nx Designers Required for a Japanese mnc

Posted on 20 Feb

Tech Revo India (P) Ltd.

Read and interpret technical drawings, sketches, markups and CAD data.
2. Research and analyze customer design proposals, specifications, manuals,
and other data to evaluate the feasibility, cost requirements of designs or
3. Specify system components or direct modification of products to ensure
conformance with engineering design and performance specifications.
4. Design and detailing of products, using CATIA V5 R20.
5. Recommend design modifications for VA/VE (cost reduction, tool design
simplification, part communization).
6. Possess in-depth knowledge in CAD application software: CATIA V5 R20
(preferred) Unigraphics NX (optional); Using CATIA V5, candidate must be
able to make complex 3D model, assemblies and detailing. Parametric
modeling concept and use of geometric expressions.
7. Knowledge of GD&T (desired) and APQP, TS/ISO, PPAP (preferred).
8. Candidate must have worked minimum 2 years on Plastic component
design (preferably automotive) and must be able to incorporate injection
molding design consideration during product design (preferred).
10. Able to travel overseas from time to time for overseas assignments at

Sr. Engineer

Posted on 20 Feb

Chrysler India Automotive pvt ltd

Carry out Heat Load and sizing calculation for AC System

1 D virtual simulation for system sizing using KULI / AMEsim

Data analysis and Optimization

Sr. Engineer

Posted on 20 Feb

Chrysler India Automotive pvt ltd

Support the embedded software validation of Climate Control.

Do automation testing using Chrysler proprietary tools and Vector tools such as CAPL or Test Automation editor

Do automation using NI tools such as Lab view and use NI DAQ

Opening for Cae-analyst - Ansys/abaqus/nastran/hypermesh

Posted on 20 Feb

3rd Dimension

Currently we are recruiting for the On-The-Job Training Advanced CAE Programs relevant for various Automotive/Automobile Modular Programs for the placement at our client locations based in Chennai, Pune, Hyderabad & Bangalore.

Selected Candidates have to undergo training in any one module as mentioned
1) Ansys - Modular level Static Linear & Non linear Analysis, Modal Analysis
2) Abaqus - Vehicle Components Strength & Durability Analysis
3) Nastran - Vehicle Componnents Strength, Durability & NVH Analysis
4) Hypermesh - FE modeling of automotive modular level components

100% Placement would be provided after the Project onjob training done.

Interested candidates pls contact Sravani at +91-8801967087 or mail  your updated CV to sravani@thirddimension.co.in

Urgent - Opening for Design Engineer - Unigraphics with Teamcenter exp

Posted on 20 Feb

Harita Techserv Limited

CAD Tool : UG-NX, Teamcentre exposure preferred.
Tool Exposure : Modeling, Drafting & Assemblies.
Relevant Experience : 3-5 years.
Domain : Industrial / Structural .

Product Development Manager/food Technologist-spices Industry

Posted on 17 Feb

SA Rawther Spices P LTd

Formulating HORECA solutions for different regions & specific customers,Making recipes,blends & production control & production approvals,understanding customers specific tastes,tasting & culinary skills are required,

Technical Leader-r & D

Posted on 19 Feb

Venus Placements

Conceptualization and execution of projects for improving the existing process and launching of new products based on breakthrough technologies.Conceptualization and execution of projects for improving the existing process and launching of new prod.

Draughtsman - Structural & Architectural

Posted on 20 Feb

FNS Resources Pvt Ltd

Required urgently for reputed company in Saudi ACC.
Draughtsman - Architectural & Structural
Experience in Civil / Building , high rise building.
Minimum 5 to 7 years experience
Muslim Candidates preferred.

Team Leader (6-12)

Posted on 21 Feb

Careernet Technologies Pvt Ltd

Company : Leaders in Bearing Manufacturer
Job Location : Bangalore.
Position : Team Leader.
Experience : 6+ Years.

Key tasks

  • Manage the Team.
  • Actively guide and participate in related projects and development activities.
  • Support GMD organisation in defining related future R&D direction.
  • Work together with other GMD units
  • Support the knowledge build up and optimisation of manufacturing processes.
  • Definer and follow R&D projects in assigned areas.
  • Ensure that the delivered results are in-line with BU/BA objectives.


  • University degree (preferably a Master) in Material or Mechanical Engineering or equivalent.
  • Team management experience, at least 5 years.
  • Deep understanding and long experience from either of the following competence areas; FEM, Heat Treatment or Hard Machining technologies.
  • Experience of working within process developments and a broad technical understanding and interest.
  • Ability to interact and create shared commitment at different organizational levels.
  • Being fluent in English is a prerequisite.
  • High level of personal drive and commitment.
If you are profile is matching to the requirement then share your profile to daniel.bhasker@careernet.co.in

Sr. Process Engineers/ Designers - FEED

Posted on 21 Feb

one of largest EPC & project management company

  • We are urgently looking for Sr. professionals with Strong experience in Process engineering / process designing
  • Strong exp in Process design engineering in chemical/ Oil and gas/ Petrochemical projects
  • Experience :: 12 - 20yrs
  • Education :: BE/ Btech (Chemical only )
  • Location :: Delhi ONLY

Interested professionals can reach me on rupali.patkar@naukri.com.

Kindly refer your friends / colleagues too

Analyst / Specialist - FEA

Posted on 20 Feb

HeadHunter India

Should have experience 4-8 years in ANSYS or equivalent software
Good fundamental knowledge in Structural analysis (Static, linear, non-linear and dynamic)
Good fundamental knowledge in Structural Dynamics

o Modal analysis
o Random vibrations
o Harmonic analysis
o Transient analysis

Should have worked at least 4-5 years on analysis projects mentioned above in ANSYS or equivalent software

Good experience in fatigue calculations
Excellent written and oral communication skills
Exposure to experimental testing
Exposure to heat transfer fundamentals
Exposure to composite materials
Candidates from any domain welcome. HVAC well preferred.

Its an IC Role 

HVAC Draughtsman

Posted on 20 Feb

Indmanpower International

1. Preparation of shop drawings for MEP services.
2. Making sectional views for individual services and CSD
3 Preparation of schedules for AHU, FCU, Diffusers, Grills etc.
4 Inspect the Site
5 Get the approval of drawing from Client / Consultant

Walk in 21 & 22-feb-14 (Sr/ Jr Design Engineer - Dadar, Mumbai)

Posted on 20 Feb

Technoclean India Pvt. Ltd.

Responsible for preparation of General Arrangement drawings, Manufacturing Drawings and Product Development.

Candidates from Design , QC, Production, Mechanical background with design experience are preferred.

Manager Controls - @ Aesa, Delhi

Posted on 20 Feb

Batliboi Ltd

-Should have exposure to Design, Engineering and Installation and Commissioning of Electrical and Automation system of HVAC systems

-Must have working knowledge of Controllers, PLCs, Software Programming, Variable Frequency Drives, Motorized Actuators, MCC Panels, Industrial Sensors (Temperature, Pressure, Humidity, Flow)
-Should have hands on experience on LV Switchboard design
-Prior experience of automation for textile factories and utilities will be preferred

CAD Designer (2-5 Years)

Posted on 19 Feb

S.M Corporate Services

* Drafting & Designing in AutoCAD 2D / 3D.
* Preparation of Video, Audio & Control schematics of AV Equipments.
* AV Equipment placement in Board room, Conf room, Auditorium
* Modeling & Designing in 3D Software"s (AUTOCAD, SOLIDWORKS).

Design Pipeline Engineer (Oil & Gas)

Posted on 19 Feb

Cherish Associates

Knowledge of pipeline design ,cross country pipelines, piping service class index ,knowledge of Code for Pressure Piping, ASME 31.3, ASME 31.1, ASTM, ANSI, API standards

Sr. Design Engineer & Asst. Manager for Severe Service Control Valve

Posted on 19 Feb

Circor, India

Positions : 02 - Sr. Design Engineer, Positions : 02 - Asst. Manager Design
Must have a Degree in Mechanical Engineering with 8 to 10 years of experience in designing Sever service valves - TBV / SCV / De-super heaters / Dump tubes / guided valve.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10  

Browse by Functional Area

Production, Maintenance, Quality | Accounts, Finance, Tax, CS, Audit | ITES/BPO/KPO, Customer Service, Ops. | System Programming | Content, Journalism | E-Commerce, Internet Technologies | Embedded/EDA /VLSI/ASIC/Chip Design | IT-Other | Engineering Design, R&D | Marketing, Advertising, MR, PR | Hotels, Restaurants | Application Programming, Maintenance | QA & Testing | Sales, BD | Site Engg., Project Management | Purchase, Logistics, Supply Chain | ERP, CRM | Banking, Insurance | HR / Administration, IR | Travel, Ticketing, Airlines | Web, Graphic Design, Visualiser | Healthcare, Medical, R&D | Guards, Security Services | Other | Secretary, Front Off, Data Entry | Teaching, Education | IT-Support, Telecom, Hardware | Top Management | DBA, Datawarehousing | Network Administration, Security | Export, Import, Merchandising | Packaging | Architecture, Interior Design | Fashion, Garments, Merchandising | Mainframe | Middleware | Corporate Planning, Consulting | Client Server | Systems, EDP, MIS | Telecom Software | Legal | Mobile | TV, Films, Production | Self Employed, Consultants | HR, Recruitment, Administration, IR | Executive Assistant, Front Office, Data Entry | Design, Creative, User Experience | Sales, Retail, Business Development | Journalism, Editing, Content | IT Software - Application Programming, Maintenance | IT Software - System Programming | Marketing, Advertising, MR, PR, Media Planning | IT Hardware, Technical Support, Telecom Engineering | Defence Forces, Security Services | ITES, BPO, KPO, LPO, Customer Service, Operations | Accounts, Finance, Tax, Company Secretary, Audit | TV, Films, Production, Broadcasting | Supply Chain, Logistics, Purchase, Materials | Production, Manufacturing, Maintenance | Strategy, Management Consulting, Corporate Planning | Fashion Designing, Merchandising | Site Engineering, Project Management | Teaching, Education, Training, Counselling | Medical, Healthcare, R&D, Pharmaceuticals, Biotechnology | Financial Services, Banking, Investments, Insurance | Analytics & Business Intelligence | IT Software - eCommerce, Internet Technologies | Travel, Tours, Ticketing, Airlines | IT Software - Network Administration, Security | IT Software - Other | Self Employed, Entrepreneur, Independent Consultant | IT Software - Client/Server Programming | Legal, Regulatory, Intellectual Property | IT Software - Telecom Software | IT Software - QA & Testing | IT Software - ERP, CRM | IT Software - Mobile | IT Software - DBA, Datawarehousing | IT Software - Embedded, EDA, VLSI, ASIC, Chip Design | IT Software - Systems, EDP, MIS | IT Software - Mainframe | Shipping | IT Software - Middleware | |